Projects

Projects

 The following projects were designed by me and source code is not yet avalable online but you can contact me for more infomation of parts list
Quadcopter   Eddie Robot Platform
Quadcopter   Eddie Robot
The ELEV-8 Quadcopter is a flying robotic platform that is lifted and propelled by four fixed rotors. There are no fixed wings; all of the lift is created from the rotors. Unlike standard helicopters, the quadcopter uses fixed-pitch blades, whose rotor pitch does not vary as the blades rotate; control of vehicle motion is achieved by varying the relative speed of each rotor to change the thrust and torque produced by each.   Eddie is a mobile robotics development platform designed to foster creativity, innovation and experimentation. Compatible with Microsoft's Robotics Developer Studio, Eddie can roam autonomously, see in 3D using the power of the Microsoft Kinect, and be driven remotely using a wireless controller
   
EEG Reader   FONA GSM Chip System
Brain Scanner   Fona
An electroencephalogram (EEG) is a test used to detect abnormalities related to electrical activity of the brain. This procedure tracks and records brain wave patterns. Small metal discs with thin wires (electrodes) are placed on the scalp, and then send signals to a computer to record the results.   GSM stands for Global System for Mobile Communications and is the network standard for much of the world. Of the four major carriers here in the United States, T-Mobile and AT&T use GSM technology.
   
Solar Panels   Solar Harvester
  harvester
Solar panels are devices that convert light into electricity. They are called "solar" panels because most of the time, the most powerful source of light available is the Sun, called Sol by astronomers. Some scientists call them photovoltaics which means, basically, "light-electricity."   Energy harvesting is the process by which energy is derived from external sources, captured, and stored for small, wireless autonomous devices, like those used in wearable electronics and wireless sensor networks.
     
Web Server with Propeller Multi Core System   RFID System
web server   RFID System
The Spinneret Web Server is an Ethernet-based development board for the Propeller microcontroller. Web page content, files, and logs can be stored on a microSD card. The serial EEPROM has 32 KB for storing a Propeller program and 32 KB for non-volatile data storage, independent of the microSD card.   Radio-Frequency Identification (RFID) is the use of radio waves to read and capture information stored on a tag attached to an object. A tag can be read from up to several feet away and does not need to be within direct line-of-sight of the reader to be tracked.